Five Quick Tips If Your Furnace Shuts Down

blog post bg

It is vital to keep your furnace running during the harsh winter months to ensure the comfort of your households’ residents. To guarantee that your system operates safely and effectively, expert preventative maintenance is required regularly. It also helps maintain a higher level of comfort and cuts utility costs.

Consider calling a professional for an inspection if you hear unusual sounds or smells from your heating unit. Cool Air Design is a qualified HVAC company that provides heating repair in Babylon for assistance. 

1. How Often Should A Furnace Be Serviced?

At least once a year, ideally before the planned usage period, each HVAC system should have a comprehensive cleaning and maintenance treatment. As a result, HVAC systems made to provide heating should be maintained in the autumn, while alternatively, you should maintain systems made to provide cooling in the spring.

HVAC systems operating in areas with high pollution levels or colder climates could need more than one maintenance visit each year. Older furnaces with worn-out components will also require more frequent maintenance than a furnace that is not too old. 

2. Tips to Follow to Fix your Furnace

What if you could fix your furnace without spending a penny on professional assistance? You can achieve it by following these simple steps.

  • Turn on the Switches and Breakers

Often, furnace repair technicians find that the only problem with your furnace is that you did not turn on all the switches and breakers. Almost all furnaces have a standard wall switch nearby or on the furnace itself. It is also a good idea to check the circuit breaker or fuse of the furnace.

  • Dirty Furnace Filters

Clogged or dirty air filters are a common issue with furnaces. Dirt, dust, and debris stuck in your filters will restrict airflow and make your house less warm. Your best defense against this is to clean your filters regularly. Alternatively, if the issue persists, you can replace the filter at your local hardware store.

  • Check your Thermostat

A malfunctioning thermostat can sometimes cause a furnace to malfunction. You should remove the cover, turn the power off, and clean the dust with a soft brush. If you switch it on again, make sure the switch is set to heat rather than cool.

  • Check the Chimney Exhaust Flue

Dirt can fall into the chimney exhaust flue and block it. You will need to switch off the furnace and the thermostat and then remove the duct where it exits the furnace. You should check dust and debris. Place the chimney back in the same order as you took it out.

  • Blocked or Leaky Ducts

Heat escapes through gaps between ducts, one of the most common furnace problems. As a result, the furnace has to work harder and is less efficient. Use aluminum duct tape to seal these gaps (do not use cloth tape).

It is better to contact a professional for tune-ups. With that in mind, you can rely on Cool Air Design. Our trained and qualified technicians provide one of the best furnace repairs in Babylon and the surrounding areas. We are happy to help!